ESU #3900 Decoder tester for decoder
NEM651,652,21MTC,PluX22,Next18, Single wires. Coreless motor, LED monitor, 20mm spk., Extension port
The ESU Decoder tester is the perferct tool for testing ESU Decoders. Inluded on the board is a speaker along with the indicators for fucntion outputs. The decoder tester pairs great with the ESU LokProgrammer, using both in combination allows you to easily program and test decoders prior to installation.
From the manufcator
The Profi Decoder Tester Extension represents the perfect test and programming bench in conjunction with the Profi Decoder Tester V2.0, where you can test and program almost all (ESU) decoders quickly and easily.
If necessary, you can add the Decoder Tester Extension to your Profi Decoder Tester V2.0: Plugged into the side of the Decoder Tester V2.0 it enables you to comfortably test all large scale decoders.
If you also have to deal with large scale LokSound XL or LokSound L decoders in your workshop, the Profi Decoder Tester Extension is just the right thing for you: You can plug on LokSound XL decoders with multi-pin connectors as well as LokSound L decoders directly and easily test them.
The extension module has multi-pin connectors for direct plug-on of the decoder types mentioned above. An LED monitor with 12 LEDs displays the status of all physical function outputs.
You may also plug on a second speaker or sensor inputs onto the multi-pin connector for quick and easy testing. Up to four servos may also be plugged on for direct testing.
Especially for the LokSound L connecting pins for a smoke generator have also been added.